With the rapid development of gas-fired boiler technology, gas-fired boilers are becoming more and more automated and intelligent. With their excellent performance, gas-fired boilers are more and more widely used in hospitals, bathing centers, supermarkets, schools, hotels and so on. They are fully automated to provide users with heating or bathing water and domestic hot water.

但是在使用過程中一些人發現燃氣鍋爐工作噪聲太大，這是什么原因呢？有沒有辦法解決這個問題呢？山東燃氣鍋爐廠家是一家資深的燃氣鍋爐生產廠家，下面來看看山東燃氣鍋爐給我們的回答。

But in the process of using, some people find that the working noise of gas-fired boilers is too big. What is the reason? Is there any way to solve this problem? Shandong Gas Boiler Factory is a veteran gas boiler manufacturer. Let's take a look at the answers from Shandong Gas Boiler.

燃氣鍋爐燃燒器噪聲增大，多是因為此油路當中截止閥關閉或者是進油量不足，油過濾器阻塞；再或者，也就是因為此進油溫度低，粘度太高或泵進油溫度過高；油泵出現故障；風機電機軸承損壞；還有就是因為此風機葉輪太臟導致的設備在噪音上比較大。

The noise of gas-fired boiler burner increases mostly because the cut-off valve is closed or the oil intake is insufficient, and the oil filter is blocked; or because the oil intake temperature is low, the viscosity is too high or the pump oil intake temperature is too high; the oil pump is malfunctioning; the bearing of fan motor is damaged; and because the fan impeller is too dirty, the equipment is noisy.

燃氣鍋爐使用時出現上述故障，也因為此油質粘度太高不易霧化(重油)；還因為旋風盤與油嘴間距不當；再者也就是因為此大火油嘴磨損或臟污；還因為此預備油箱加熱溫度過高，致使蒸汽使油泵送油不順；或者是因為此燃油鍋爐里面的的油含水導致的。

The above-mentioned failures occur in gas-fired boilers because the oil viscosity is too high to be atomized (heavy oil); the distance between the cyclone and the nozzle is not appropriate; furthermore, the fuel nozzle is worn or dirty; furthermore, the heating temperature of the reserve tank is too high, which makes the oil pump delivery not smooth; or the water content of the oil in the fuel-fired boilers is the cause.

燃氣鍋爐使用時一旦出現上述故障，應盡快進行處理，在進行處理的時候，應該要做逐步減小試驗；之后也應該要提高加熱溫度；調整距離(在0~10mm之間)；清潔或更換；設定約50℃左右即可；換油或排水。

Once the above-mentioned faults occur in the use of gas-fired boilers, they should be treated as soon as possible, and the test should be gradually reduced when the treatment is carried out; after that, the heating temperature should be increased; the distance should be adjusted (between 0 and 10 mm); the cleaning or replacement should be carried out; the setting temperature should be about 50 degrees Celsius; the oil or drainage should be changed.

看了山東燃氣鍋爐給我們的回答，小伙伴們是不是都已經清楚了問題的所在？如果您還有關于燃氣鍋爐的問題，歡迎咨詢我們的客服，我們的官網是：http://m.tiaoi.com.cn

Looking at the answer given by Shandong Gas Boiler, have all the small partners been clear about the problem? If you have any questions about gas-fired boilers, please consult our customer service. Our official website is http://m.tiaoi.com.cn.