要切合實際選擇導熱油生產廠家與,一般我們建議用戶購買長城、昆侖、美孚牌的合成型導熱油,導熱油的沸點應高于系統的工作溫度。由于不同牌號的導熱油嚴禁混合使用,所以建議選擇導熱油時要考慮方便采購或多采購一些備用。
In order to select the manufacturer and brand of heat transfer oil according to the actual situation, we generally recommend that users buy synthetic heat transfer oil of great wall, Kunlun and Mobil brands. The boiling point of heat transfer oil should be higher than the working temperature of the system. As different brands of heat transfer oil are strictly prohibited to be mixed, it is suggested to consider the convenience of purchasing or purchasing more spare heat transfer oil.
在整個加熱系統安裝、檢驗完成后,進行系統注油,導熱油通過膨脹槽注油口處加注,注油時打開系統中所有的閥門(放油閥除外),然后通過膨脹槽將導熱油徐徐注入系統。當液面顯示約為膨脹槽高度1/2時,停止注油。注油后蓋好注油蓋,連接好溢油管,仔細檢查管路各閥門開關情況,嚴禁系統內存在滲油、漏油現象。
After the installation and inspection of the whole heating system, the system is filled with oil. The heat transfer oil is filled through the oil filling port of the expansion tank. When filling, open all valves in the system (except the oil drain valve), and then slowly inject the heat transfer oil into the system through the expansion tank. When the liquid level is about 1 / 2 of the expansion tank height, stop filling. Fill the oil back cover, connect the oil overflow pipe, carefully check the opening and closing of all valves in the pipeline, and strictly prohibit oil leakage in the system.
電磁導熱油爐在使用前必 須要選擇一款好的導熱油,同時在加注導熱油時也必 須注意一些事項。電磁導熱油爐已經廣泛應用到工業領域,作為一種新型導熱油爐,電磁導熱油爐在以及可靠性上都要于同行業其他種類的導熱油爐。
Electromagnetic heat transfer oil furnace must choose a good heat transfer oil before use, and pay attention to some matters when filling heat transfer oil. Electromagnetic heat conduction oil furnace has been widely used in industry. As a new type of heat conduction oil furnace, electromagnetic heat conduction oil furnace is superior to other kinds of heat conduction oil furnace in energy saving and reliability.