1、鍋爐出廠時應當附有“技術規范要求的設計文件、產品質量合格證明、及使用維修說明、監督檢驗證明(性能監督檢驗證書)”。
1. When the boiler leaves the factory, it shall be attached with "design documents required by safety technical specifications, product quality certificate, safety and use and maintenance instructions, supervision and inspection certificate (safety performance supervision and inspection certificate)".
2、鍋爐的安裝、維修、改造。從事鍋爐的安裝、維修、改造的單位應當取得省級質量技術監督局頒發的特種設備安裝維修資格證書,方可從事鍋爐的安裝、維修、改造。施工單位在施工前將擬進行安裝、維修、改造情況書面告知直轄市或者轄區的特種設備監督管理部門,并將開工告知送當?shù)乜h級質量技術監督局備案,告知后即可施工。
2. Boiler installation, maintenance, transformation. Units engaged in the installation, maintenance and transformation of boilers shall obtain the qualification certificate for the installation and maintenance of special equipment issued by the Provincial Bureau of quality and technical supervision before they can engage in the installation, maintenance and transformation of boilers. Before construction, the construction unit shall inform the special equipment safety supervision and Management Department of the municipality directly under the central government or its jurisdiction of the proposed installation, maintenance and transformation in writing, and send the commencement notice to the local county-level Bureau of quality and technical supervision for the record, and the construction can be started after the notification.
3、鍋爐安裝、維修、改造的驗收。施工完畢后施工單位要向質量技術監督局特種設備檢驗所申報鍋爐的水壓試驗和安裝監檢。合格后由質量技術監督局、特種設備檢驗所、縣質量技術監督局參與整體驗收。

3. Acceptance of boiler installation, maintenance and transformation. After the completion of construction, the construction unit shall declare the boiler hydrostatic test and installation supervision to the special equipment inspection institute of quality and Technical Supervision Bureau. After passing, the quality and Technical Supervision Bureau, special equipment inspection institute and county quality and Technical Supervision Bureau shall participate in the overall acceptance.
4、鍋爐的運行。鍋爐運行必須由經培訓合格,取得《特種設備作業人員證》的持證人員操作,使用中必須嚴格遵守操作規程和八項制度、六項記錄。
4. Boiler operation. The boiler must be operated by the qualified personnel who have been trained and obtained the certificate of special equipment operator, and the operation procedures, eight systems and six records must be strictly observed.
5、鍋爐的注冊登記。鍋爐驗收后,使用單位必須按照《特種設備注冊登記與使用管理規則》的規定,填寫《鍋爐(普查)注冊登記表》,到質量技術監督局注冊,并申領《特種設備使用登記證》。
5. Registration of boilers. After the boiler acceptance, the user must fill in the boiler (general survey) registration form in accordance with the regulations of the regulations on the registration and use of special equipment, register with the Bureau of quality and technical supervision, and apply for the registration certificate for the safe use of special equipment.
6、鍋爐的檢驗。鍋爐每年進行一次定期檢驗,未經定期檢驗的鍋爐不得使用。鍋爐的附件閥每年定期檢驗一次,壓力表每半年檢定一次,未經定期檢驗的附件不得使用。
6. Boiler inspection. The boiler shall be inspected regularly once a year, and the boiler without regular safety inspection shall not be used. The safety valve of the safety accessories of the boiler shall be inspected once a year, and the pressure gauge shall be inspected once half a year. The safety accessories without regular inspection shall not be used.
7、嚴禁將常壓鍋爐安裝為承壓鍋爐使用。嚴禁使用水位計、閥、壓力表三大附件不全的鍋爐。
7. It is strictly forbidden to install atmospheric pressure boiler as pressure boiler. It is strictly forbidden to use boilers with incomplete water level gauge, safety valve and pressure gauge.