不銹鋼板與鉛板之間的連接采用升降式不銹鋼板接口技術，均采用進口膠接，粘接十分光滑、牢固、不脫膠;主體結構采用獨特設計，使得門與墻的縫隙劑量泄漏很小;配備紅外線防夾裝置，確保員工人身;另外，還配備了防相位損傷屏蔽門開啟電機裝置，確保三相電源的反相位在三相電源的反相位時能夠被立即知曉。我廠生產的防護門是由不銹鋼、抗輻射鉛板焊接而成，為了達到門窗結構的合理美觀，應用高壓精制而成的復合防護板等裝飾板材。具有設計簡單合理，大氣美觀，開啟方便靈活，穩定可靠，噪音低，保護效果好。整個工程系統科技含量高，自動化程度高，操作系統采用微電腦智能模塊，包括變頻器、紅外保護裝置、門機聯動裝置、遙控裝置、進口電機、防盜裝置、警示標志等。
　　The connection between the stainless steel plate and the lead plate adopts the lifting type stainless steel plate interface technology, all of which are imported glued, and the bonding is very smooth, firm and not degummed; the main structure adopts a unique design, so that the gap dose between the door and the wall leaks very little; the infrared anti pinch device is equipped to ensure the safety of workers; In addition, it is equipped with anti phase damage PSD opening motor device to ensure that the reverse phase of the three-phase power supply can be immediately known when the reverse phase of the three-phase power supply. The protective door produced by our factory is welded by high-quality stainless steel and high-quality radiation resistant lead plate. In order to achieve the reasonable and beautiful structure of doors and windows, composite protective plate and other decorative plates refined by high pressure are used. The utility model has the advantages of simple and reasonable design, beautiful atmosphere, convenient and flexible opening, stable and reliable, low noise and good protection effect. The whole engineering system has high technology content and high automation degree. The operation system adopts microcomputer intelligent module, including frequency converter, infrared protection device, door machine linkage device, remote control device, imported motor, anti-theft device, warning sign, etc.

　　1. 卷簾門操作時，操作人員要站在能看到工作情況的位置進行操作，否則容易發生事故和損壞;
　　1. When operating the rolling shutter door, the operator shall stand at the position where he can see the working conditions, otherwise accidents and damages may occur easily;
　　2. 引導門簾與門機防止接觸酸性、堿性溶液，防止腐蝕門簾外觀;
　　2. Guide the curtain and the door operator to prevent contacting with acid and alkaline solution and corrosion of the curtain appearance;
　　3.門座式起重機工作、滑動、傳動部位應定期檢查(每年少2次)，并根據需要及時加油，保證正常運行;
　　3. The working, sliding and driving parts of gantry crane shall be inspected regularly (at least twice a year), and oil shall be added timely as required to ensure normal operation;
　　4. 在開啟和關閉的過程中不連續,應該與不連續的函數,不應出現不連續和繼續下滑,如發生滑動的距離大于50毫米,應立即控制電器和門閘仔細檢查修理,正常工作不連續。
　　4. In the process of opening and closing, the discontinuity should be a function of the discontinuity, and there should be no discontinuity and continuous sliding. If the distance of sliding is more than 50 mm, the electrical appliances and gate should be controlled immediately to check and repair carefully, and the normal operation is not continuous.