引門使用一段時間后假如沒做好保養工作，很有可能出現變形，變形的形式也有幾種。下面小編就給你介紹一下如何分辨導門變形的方法。
　　If the door is not well maintained after a period of time, it is likely to deform, and there are several forms of deformation. Here is how to distinguish the deformation of the guide door.
　　1、導門波浪形變形是指導門的縱軸成螺旋形。這種變形不一定會導致任何強度的損失，但如果變形嚴重，它將產生一個跳躍，導致一個不規則的驅動。過長時間會造成鐵絲磨損和斷絲、波浪，在引線門長度不超過25d的范圍內，這時引線門應報廢。
　　1. The wave shaped deformation of the guide door is that the longitudinal axis of the guide door is spiral. This deformation does not necessarily lead to any loss of strength, but if the deformation is serious, it will produce a jump, resulting in an irregular drive. If the lead wire is worn, broken or wavy for a long time, the lead wire door shall be scrapped within the lead wire door length of no more than 25d.
　　2. 當外面的鋼絞線脫節或比里面的鋼絞線長時，就會發生這種變形，并且籠形的鉛門應立即報廢。
　　2. When the outer steel strand is out of joint or longer than the inner steel strand, such deformation will occur, and the cage shaped lead door shall be scrapped immediately.
　　3、鋼絲繩被擠出時引線門不平衡，鋼絲繩被擠出引線門應立即報廢。這種變形是鋼絲的一部分或鋼絲束在引線門后的滑輪溝后面形成一個側拱，這種變形往往是由沖擊載荷引起的，如果這種變形嚴重，那么引線門應該報廢。
　　3. When the wire rope is extruded, the lead door is unbalanced, and the wire rope extruded lead door shall be scrapped immediately. This kind of deformation is that a part of the steel wire or the steel wire bundle forms a side arch behind the pulley groove behind the lead door. This kind of deformation is often caused by the impact load. If this kind of deformation is serious, the lead door should be scrapped.
　　4. 鋼索直徑嚴重增加的鉛門應報廢。扭結是由于鉛門到環不旋轉的軸的情況下張力和由變形引起的,結果是不平衡的發生扭曲距離和引起額外的磨損,嚴重的鉛門變形,只留下一個很小的一部分鉛門的力量。
　　4. Lead doors with seriously increased cable diameter shall be scrapped. The kink is caused by the tension and deformation from the lead door to the non rotating shaft of the ring. As a result, the unbalanced twisting distance and additional wear are caused. Serious lead door deformation only leaves a small part of the lead door force.

　　5. 嚴重扭結的鉛門應立即報廢。引線澆口直徑的局部減小常與繩芯的斷裂有關。
　　5. The seriously twisted lead door shall be scrapped immediately. The local reduction of the diameter of the lead gate is often related to the fracture of the core.
　　6. 嚴重減少繩子直徑的鉛門應該報廢。鉛門部分因機械事故被壓扁，嚴重時應報廢鉛門。
　　6. The lead door with seriously reduced rope diameter shall be scrapped. The lead door part is flattened due to mechanical accident, and the lead door shall be scrapped in case of serious accident.
　　8、彎曲是鉛門在外力影響下產生的變形角度，這種變形應立即將鉛門報廢。因高溫或電弧損壞的鉛門應在經過特殊加熱并具有可識別的顏色后報廢。
　　8. Bending is the deformation angle of lead door under the influence of external force, which should be scrapped immediately. Lead doors damaged by high temperature or electric arc shall be scrapped after being specially heated and provided with recognizable color.
　　以上是關于分道門是否變形的方法，希望能幫助大家。
　　The above is about whether the diversion door is deformed. I hope it can help you.