In the process of gas-fired boiler working, we should always pay attention to the water level meter of the boiler, because it can truly reflect the water level problem in the furnace and play a monitoring role for our operation of the boiler. So when the water level meter in the gas boiler is abnormal, what can we do to deal with it? Now let's check it with Shandong Gas Boiler Factory.

一、水位超過汽包水位表時

I. When the water level exceeds the drum water level meter

燃?xì)忮仩t滿水時經處理汽包水位仍繼續上升，并超過汽包水位表上部可見水位時，就緊急停爐，盡快與母管解列，立即停止進水，開啟再循環門，加強燃?xì)忮仩t放水，并注意汽包水位表上部水位的出現，待水位放正常水位后關閉。待機爐情況正常后，取得值長同意，可按熱爐升火操作。

When the water level of the treated drum continues to rise when the gas boiler is full of water, and when it exceeds the visible water level on the upper part of the drum water level meter, the boiler shall be shut down urgently, be separated from the main pipe as soon as possible, stop the water intake immediately, open the recirculation door, strengthen the drainage of the gas boiler, and pay attention to the appearance of the water level on the upper part of the drum water level meter until the water level reaches the normal level. Close. After the standby furnace is in normal condition, the consent of the value leader can be obtained, and the operation can be carried out according to the heating furnace.

二、汽包內水位超過+75mm時

2. When the water level in the drum exceeds + 75mm

1、開啟汽包緊急放水門待水位放正常水位時應立即關閉。

1. Open the drum emergency discharge valve and close it immediately when the water level reaches normal level.

2、根據汽溫情況，關小或關閉減溫水門，開啟主汽管疏水門及過熱器疏水門。

2. According to the steam temperature, close or close the cooling water gate, open the main steam pipe drain and Superheater drain.

三、汽包水位表內看不見水位時

3. When the water level is not visible in the drum water level meter

1、進行汽包兩只水位表的對照與沖洗，檢查指示是否正確。全開汽包水位表放水門，再緩慢關閉其放水門，如水位表內有水位出現，并繼續上升充滿水位表，證明燃?xì)忮仩t滿水尚未超過水位表汽側面管，則按緊急停爐處理。

1. Contrast and flush the two water gauges in the drum to check whether the instructions are correct. If the water level appears in the water level gauge and continues to rise, the full water level gauge proves that the full water of the gas boiler has not exceeded the steam side pipe of the water level gauge, the boiler shall be treated as emergency shutdown.

2、開啟水位表放水門，又緩慢關閉其放水門后，水位表內看不見水位。為證實是嚴重滿水，再關閉汽水門，開啟放水門，將水位表內存水放盡后，立即關閉放水門。迅速微開汽門水位表內有水位出現，并充滿水，此時方可確定水位已超過汽包水位表的汽側通管，應按緊急停爐處理，盡快與母管解列。

2. Open the water level meter discharging gate, and slowly close its discharging gate, the water level can not be seen in the water level meter. In order to prove that the water is seriously full, then close the steam valve, open the drain valve, and close the drain gate immediately after draining the water in the water gauge. When the water level appears and is filled with water in the water level meter of the micro-opening valve quickly, it can be determined that the water level has exceeded the steam side pipe of the drum water level meter. The steam side pipe should be treated as emergency shutdown and be separated from the main pipe as soon as possible.

3、當燃?xì)忮仩t發生水位事故時，若難以判明水位高低，應立即停爐。燃?xì)忮仩t停爐后用叫水法進行叫水，檢查汽包水位。

3. When water level accident occurs in gas-fired boilers, if it is difficult to determine the water level, the boiler should be stopped immediately. After the gas-fired boiler shuts down, water is called by calling method to check the drum water level.

本文來自：山東燃?xì)忮仩t，更多的內容請點擊：http://m.tiaoi.com.cn！我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article is from Shandong Gas Boiler. For more information, please click: http://m.tiaoi.com.cn! We will provide you with a satisfactory service to ask questions. Welcome your call!